5 Inch Plug-and-Play 800 x 480 HDMI Display Module With USB TouchScreen
This is a fantastic HDMI monitor with usb touch screen.
Utilizing pre-existing Linux/Windows/Mac drivers, this 800 x 480 touchscreen will help you hit the ground running.
Resistive touch function give the user full control over any device. Supports Windows XP SP3, Windows 7, Windows 8, Windows 8.1, Windows 10, Android 4.2, Windows CE7, Ubuntu and Debian.
Built-in EDID device information very easy to let the equipment correctly identified, USB touch can support functions of the right mouse button and drag and drop.
We special design the power circuit for this monitor, which just only need less than 150mA current.
If you do not need the touchscreen function, you just only plug HDMI line to let this monitor run, we've tested it successfully on PC, laptop, Raspberry pi, Beaglebone Black, Udoo, computer stick, SLR camera
For use with a Raspberry Pi we suggest editing config.txt to set the HDMI to the native 800×480 in case it doesn't detect the resolution properly.
The easiest way to edit the config.txt is to put the Pi TF card into an every day computer and edit config.txt with any text editor and save.
Resolution up to 800 x 480
USB resistive touch control
Free-driver, Plug and Play
Supports Raspbian, Ubuntu Mate, NOOBS with RaspberryPi
Supports Debian, Angstrom with BeagleBone
Supports Windows / Ubuntu / Mac with PC
Supports Intel-Processor Base MiniPC
ULP (Ultra Low Power) consumption backlight
Power: 5V Power via USB Micro
Current: Less than 150mA
Display Type: 5 inch TFT LCD
Interface: HDMI & USB 2.0 Full Speed
Dimensions: 133mm x 76mm x 7mm
Weight without package: 120g
Weight with package: 140g
1 x 5 Inch HDMI Display
1 x Touch pen
Test images, for reference only, package does not includes the test tool.