Original Banana Pi M1+ Plus A20 Dual Core 1GB RAM On-board WiFi Open-source SBC Development Board


What's the Banana Pi M1+?

Banana PI M1+ is an updated version of Banana Pi M1 (BPI-M1).
Banana Pi M1+ is the open source hardware platform,Banana PI M1+ is an quad core version of Banana Pi ,Banana Pi M1+ is the quad core more better than the Banana Pi M1,it support WIFI onboard.

Banana Pi M1+ series run Android,Debian linux,Ubuntu linux, Raspberry Pi imange and others imange.
Elastos coordinate multi CUP to from the family cloud entirnment which based on the “software/hardware service”
Banana Pi M1+ hardware: 1Ghz ARM7 dual-core processor, 1GB DDR3 SDRAM,
Banana Pi M1+ with Gigabit ethernet port, It can run with Android 4.4 smoothly. The size of Banana Pi M1+ same as Banana Pi M1, it can easily run with the game it support 1080P high definition video output, the GPIO compatible with Raspberry Pi B+ and can run the ROM Image.

  Hardware Specification of Banana PI M1+ (BPI-M1+)


  Allwinner A20


  ARM Cortex-A7 Dual-Core1GHz (ARM v7 instruction set)


  Mali400MP2 Complies with OpenGL ES 2.0/1.1 (hardware acceleration support)


  1GB DDR3 (shared with GPU)


  5V/2A via MicroUSB (DC in Only) and/or MicroUSB (OTG)




  Low-level   perpherials

  40 Pins Header,

  28×GPIO, some of which can be used for specific functions including UART, I2C, SPI, PWM, CAN, I2S,   SPDIF,   LRADC, ADC, LINE-IN,FM-IN,HP-IN.

  On board   Network

  10/100/1000Mbps ethernet (Realtek RTL8211E/D)

  Wifi Module

  WiFi 802.11 b/g/n



  On board   Storage

  MicroSD (TF) card,SATA 2.0


  Supports multi-channel HD display:

  HDMI 1.4 (Type A – full)

  LVDS/RGB/CPU display interface (DSI) for raw LCD panels

  Composite video (PAL and NTSC) (via 3.5 mm TRRS jack shared with audio out)

  11 HDMI resolutions from 640×480 to 1920×1080 plus various PAL and NTSC standards


  HD H.264 2160p video decoding

  Mutil-format FHD video decoding, including Mpeg1/2, Mpeg4, H.263, H.264, etc H.264 high profile   1080p@30fps or 720p@60fps encoding

  Audio outputs

  HDMI,analog audio (via 3.5 mm TRRS jack shared with composite video out),I2S audio (also potentially for   audio input)


  Parallel 8-bit camera interface

  Audio input

  On board micphone


  2 USB 2.0 host, 1 USB 2.0 OTG (all direct from A20 chip)


  Reset button

  Power button

  U-boot button


  Power status led (red)

  User defined led1 (green)

  User defined led2 (blue)


  IR reciever

  Interface definition


  92 mm × 60mm



Package Included:

1x Banana Pi M1+ Board