Original Banana Pi M2 BPI-M2 A31S Quad Core Development Board
Note: BPI-M2 do not has SATA interface, if you need to access the hard disk, please connect the USB mobile hard disk via USB port.
OS download, please visit the official forum www.bananapi.com
What's the Banana Pi M2?
Banana Pi M2 is the open source hardware platform, is an quad core version of Banana Pi, Banana Pi M2 is the quad core more better than the Banana Pi M1, it support WIFI onboard.
Banana Pi M2 series run Android, Debian linux, Ubuntu linux, Raspberry Pi system and others system.
Banana Pi M2 hardware: 1Ghz ARM7 quad-core processor, 1GB DDR3 SDRAM, Gigabit Ethernet port, 4 USB interface, smooth running Android 4.4
The size of Banana Pi M2 same as Banana Pi M1, it can easily run with the game it support 1080P high definition video output, the GPIO compatible with Raspberry Pi B+ and can run the ROM Image.
|Hardware Specification of Banana pi BPI-M2:|
|CPU||A31S ARM Cortex-A7 quad-core, 256 KB L1 cache 1 MB L2 cache|
|GPU||PowerVR SGX544MP2: Comply with OpenGL ES 2.0, OpenCL 1.x, DX 9_3|
|Memory (SDRAM)||1GB DDR3 (shared with GPU)|
|Power Source||5V @2A via MicroUSB(DC In Only) and/or MicroUSB (OTG)|
|Low-level perpherials||40 Pins Header, 28xGPIO, some of which can be used for specific functions including UART, I2C, SPI, PWM, CAN, I2S, SPDIF, LRADC, ADC, LINE-IN, FM-IN, HP-IN|
|Onboard Network||10/100/1000Mbps ethernet (Realtek RTL8211E/D)|
|Wifi Module||Wifi 802.11 b/g/n (AP 6181 module on board)|
|On board Storage||Micro SD(TF) Card, Not SATA support|
|Display||HDMI 1.4 (Type A -full)|
|LVDS/RGB/CPU display interface (DSI) for raw LCD panels|
|Composite Video(PAL and NTSC)(via 3.5mm TRRS jack shared with audio out)|
|11 HDMI resolutions from 640×480 to 1920×1080 plus various PAL and NTSC standards|
|Video||HD H.264 2160p video decording|
|Multi-format FHD video decording,including Mpeg 1/2, Mpeg4,H.263,H.264,ect|
|H.264 high profile 1080p@30fps or 720p@60fps encording|
|Camera||Parellel 8-bit camere interface|
|Audio input||On board microphone|
|USB||4 USB 2.0 host, 1 USB 2.0 OTG|
|Buttons||Reset button, Power button, U-boot button|
|Leds||Power status led and RJ45 LED|
|Product size||92 mm × 60mm|
1 x Banana pi BPI-M2