SupTronics X600 Expansion Board For Raspberry Pi 3/2/Model B/B+


$54.45

Local Warehouse
Cheapest Prices Worldwide
Fast Postage Available
100% Customer Satisfaction
Quality Guarantee
Buy Direct From Supplier
 
Hurry up! Just 12 items left in stock

SupTronics X600 Expansion Board For Raspberry Pi 2 Model B / B+

Feature:

Input Voltage: – 6V to 20Vdc converted to 5V, 3A via step-down DC/DC converter to power the Raspberry Pi and SATA device
SATA:  Allows you to connect SATA devices to your Raspberry Pi
Wireless: – Built in IR sensor (38KHz)

– Allows you to extract audio signals from HDMI of your Raspberry Pi
– Converts HDMI audio to digital optical or Coaxial or stereo RCA analog
– The SPDIF optical or Coaxial audio output supports all audio formats up to 5.1CH Dolby Digital 5.1CH / AC3 & DTS 5.1CH audio
– Extract digital 2CH PCM stereo audio signal from the HDMI input and convert it to 2CH analog stereo output through its RCA style L/R analog output or earphone jack
– Provides the Best Flexibility through Three NEW Audio EDID Settings: Pass, 2CH and 5.1CH
– Maintains surround format when converting to digital optical audio
– Supports high definition input up to 1080p@(24/60)Hz, output resolution follows input
– Supports HDMI signal amplification and equalization output for repeater function
– HDMI output supports all audio formats including more advanced Dolby Digital Plus, PCM5.1CH and beyond
– Power output socket
– Directly connected on top of the Raspberry Pi using the board GPIO header pins 
– No wiring nor soldering is required 
– Duplicated the 40-pin header of the R-Pi in order to support existing expansion boards 

Note:

1. The RCA L/R output will not have sound if the incoming audio is multi-channel audio (>2CH). Set EDID switch to 2CH for RCA L/T stereo application. 
2. TOSLINK optical audio output does not support Dolby Digital Plus (used by Roku and Chromecast) and higher formats, such as HD audio (Dolby TrueHD, DTS-HD Master Audio, PCM5.1 and beyond). 
3. Set audio EDID to 5.1CH for DD5.1CH / DTS5.1CH, use optical output to connect to audio receiver for surround sound. 

More information: https://www.suptronics.com/Xseries/x600.html

Package included:

1 x Expansion board 
1 x HDMI to VGA connector
1 x USB male to male connector
1 x Pack of install screws


Category: