Input voltage: DC12V
Output voltage: AC 0-110V-172V-200V-220V
Quiescent current: about 0.05A
Output waveform: high frequency square wave
Output frequency: about 20KHZ
1. The board belongs to high frequency square AC output; it is not suitable for the inductive appliance, such as motor, fan and coil transformer.
2. While picked up with low-load machines (LED light, mobile phone charger and DVD set-top box), you are suggested to pick up with low voltage point, such as: 172V/110V.
3. You should install a large heat sink to release its long time high-load (¡Y100W) work.
4. You could not connect the power inversely. Besides, power supply and power wire should have large enough current.
5. Do not overload and short-circuit because it without any protections.
6. The number in measured by the output high frequency non-load voltage meter will be a little higher.
Output wiring the following voltages:
1 x 150W Converter DC 12V to AC 220V Inverter