Banana Pi G1 BPI-G1 WiFi Bluetooth Smart Home Zigbee Development Board


Local Warehouse
Cheapest Prices Worldwide
Fast Postage Available
100% Customer Satisfaction
Quality Guarantee
Buy Direct From Supplier
Hurry up! Just 3 items left in stock

Banana Pi G1 BPI-G1 WiFi Bluetooth Smart Home Zigbee Development Board

What's BPi-G1?
BPI-G1 is an integrated IEEE802.11 b / g / n (WIFI wireless network), IEEE802.15.4 (Zigbee), IEEE 802.11-2007 Standard (Bluetooth Low Energy4.0) development board.
It is very easy to put these wireless protocol seamlessly together, you can exchange any different transport protocols, and three kinds of wireless protocols are integrated by three single-chip SOC, you can easily create your own Internet of things (IoT).
WIFI part of which is the use of TI's CC3200, which is a high-performance ARM® Cortex®-M4 wireless SOC, internally integrated TCP / IP protocol stack, simply use the BSD Socket can connect to the Internet.
The Zigbee is used TI CC2530, which integrates wireless capabilities and enhanced 8051 core SOC, TI after years of improvement, it is already quite mature and stable, TI's Z-stack has achieved Zigbee 2007 / Pro, you can use the 16's short address, you can use the 64-bit long address communication, face large local interconnect systems, advanced security encryption and mesh network structure can easily cope.
Bluetooth 4.0 (BLE) using TI CC2540 / 1, an integrated BLE stack and enhanced 8051 core, low-power wireless SOC, at present, most mobile phones have support for Bluetooth 4.0, both as a wearable device, or mobile interactive Accessories, CC2540 can be easily completed.
Meanwhile BPI G1 also incorporates a high-performance STM32 ARM® Cortex®-M3 microcontroller, which will help you deal with time-consuming data or transit, the three wireless SOC coordinated. Therefore, the use of BPI G1 can help you quickly achieve a variety of things DIY design.

Hardware Specification
CPU A31S ARM Cortex-A7 quad-core, 256 KB L1 cache 1 MB L2 cache
GPU PowerVR SGX544MP2 Comply with OpenGL ES 2.0, OpenCL 1.x, DX 9_3
Memory (SDRAM) 1GB DDR3 (shared with GPU)
On board Storage TF Card (Max. 64GB) / MMC card slot
On board Network 10/100/1000 Ethernet RJ45, WIFI onboard
Video Input A CSI input connector allows for the connection of a designed camera module
Audio output 3.5mm Jack and HDMI
USB 2.0 Ports 4 USB port
Buttons Reset button, Power button
GPIO (2X20) pin GPIO, UART, I2C bus, SPI bus with two chip selects, CAN bus, ADC, PWM, +3.3V, +5V, ground
LED Power Key & RJ45
Romote IR (Optional)
OS Android and Linux etc. OS
Working temperature range -15°C to 75°C
Product size 92 x 60mm
Weight 48g

Package included:

1 x Banana Pi G1 Development Board