DMX512 DC 5V 2.4G 2 In 1 Wireless Receiver&Transmitter PCB Module Board LED Controller With Antenna


$15.82

Local Warehouse
Cheapest Prices Worldwide
Fast Postage Available
100% Customer Satisfaction
Quality Guarantee
Buy Direct From Supplier
 
Hurry up! Just 3 items left in stock

Description:

DMX512 wireless receiver/transmitter transmits standard DMX512 protocol data (generated by console ) by wireless way, which solves lighting control issues of wireless transmitting completely between console and lighting, lighting and lighting and so on, It get rid of connecting cable limited completely And also can ensure without any time delay when signal data is transmitting, signal data is real time and reliably.

This product adopt 2.4G ISM frequency section( global opening section) without permission limited High effective GFSK modulate,communication design; 126 channels jumping frenquecy automaticly, high anti-jamming ability.
 
Features:

1. Product name: 2.4G wireless DMX512 R/T moulde board
2. Small size,Esay to suit for interior of accessed lighting
3. Single key to operate,tricolor LED displaying
4. Transmitting standard DMX512 protocol data of console, also can transmitting lighting and lighting DMX512 protocol data.
5. 126 channels jumping frenquecy automaticly, high anti-jamming ability. to ensure works reliability
6. 7 groups ID code settable, User can use 7 groups individual wireless net without any interfere each other in the same place.

Specification:

1. Input voltage: DC 5V 500mA MIN
2. Work frequency section: 2.4G ISM,126 channels frequency section
3. Max transmitting power rate: 20dBm
4. Receiver sensitive: -94dBm
5. Material: copper
6. Signal port: 3pin female plug
7. Communication distance: 400m ( visible distance )
8. Signal port: RS485 or CPU series port AURT
9. Modules board size: 70 x 18mm / 2.75 x 0.7inch ( L x W )
10. Application: Upgrade DMX512 stage light

Operating manual:
 
 ID code and LED color corresponding correlation:
 
1: RED
2: GREEN
3: RED+GREEN = YELLOW
4: BLUE
5: RED+BLUE = PURPLE
6: GREEN+BLUE = CYAN
7: RED+GREEN+BLUE = WHITE
 
Press key 1 time to indicate ID setting, press again to set ID, then ID value adding 1 each time by press.
 
Working condition:
 
LED constant litght up: no DMX or wireless signal.
Red LED flash: transmitting.
Green LED flash: Receiving
RF frequency——2. 400-2. 525 G, total 126 channels, it is searching automatically.
ID Code——-"1-7" groups ID code, press "key" button for setting, it only can work under same ID code of transmitter and receiver.
 
Establishing Communication:
 
1. Power on DMX512 wireless received board and transmitted board.
2. Press "key" button to set same ID value of transmitter board and receiver board, please use different ID value if you need use more than 1 group wireless net at same time in same place.
3. The red LED flashes when transmitter transmits DMX data by no interfered frequency section, then receiver changes communicated frequency section. Green LED flash till received corrected same ID value, LED flash faster once DMX data faster.
4. Communication was established correctly then.

Note:

The color of board is random delivery.
Indoor use only.
It’s better to return to manufacturer if repairment is must, don’t do any repairment unless qualified electrician.
The working condition should be under temperature -20°C~+45°C, 10% 90%RH, no congelation, so as to ensure it’s lifetime.
It can’t be covered by any superstratum, it should be swept periodly to prevent dust.

Package included:

1 x DMX512 2 in 1 wireless receiver&transmitter module with antenna





Category: